The iGo kit is absolutely beautiful, and it includes everything you need to go from zero to vaping. Just add juice. This is PERFECT for beginners as well as seasoned vapers. The battery tube matches the BCC tank perfectly for a streamlined, classy appearance. The device itself is smaller in diameter than most mods, and is smaller than the Vamo and SID. However, this kit is still a whopping 2100 mah capacity. The battery is removable, so the device can last longer than the lifespan of a lithium ion battery. Just replace the battery and keep on going.   The iGo charges on a MICRO usb just like the one your cell phone uses, probably. It is also a passthrough device, meaning that you can vape while it charges. There is no need to remove the battery, and there is no need to purchase an extra charger. Everything is included.   There are two voltage modes with the iGo kit. The iGo can either be set to a constant 3.3 volts, or it can be set to output at the true battery voltage (4.2v-3.3v) depending on the charge. The iGo kit includes:
  • 1 × BCC Mega bottom coil tank
  • 3 × BCC replacement coils
  • 3 × BCC Mega 510 drip tip
  • 1 × Control head
  • 1 × iGo battery tube
  • 1 × Rechargeable 2100mAh battery (16650 li-ion)
  • 1 × iGo micro USB cable
  • 1 × iGo wall adapter
  • 1 × iGo users manual
The iGo button color will change as the battery discharges, so you can easily tell how much battery life is left.
  • When the power is 50%, the LED displays white;
  • When the power is 10-50%, it diesplay light blue;
  • When the power is less than 10%, it will be dark blue to warn that the battery need to be charged.
When the battery is fully charged, the charging will stop automatically. It usually takes 3 hours to fully charge.
Short circuit protection:
Should an output short circuit happen, the protection device will disconnect the power supply automatically and the battery will be locked.
The battery will be unlocked and continue to work when charged again.
Specs
  • Color:Black/Silver
  • Diamater:19mm
  • Length:113mm
How to switch between constant voltage output mode and inconstant voltage output mode:
Click the button 5 times within 2 seconds to turn the battery off.
Keep pressing the button for a few seconds until the button LED blink orange 3 times.
Click the button 5 times within 2 seconds to turn the battery on.
How to switch between inconstant voltage output mode and constant voltage output mode:
Click the button 5 times within 2 seconds to turn the battery off.
Keep pressing the button for a few seconds until the button LED blinks blue 3 times.
Click the button 5 times within 2 seconds to turn the battery on.